Archiv der Kategorie: corners

How to Paste Background at the corners: instructions, gluing outer, inner Part, docking

Step by step directions for gluing inner corners

After finishing, the major problem can be irregular walls as well as the resulting folds on the background. It is also essential to take into account that as soon as the walls are crooked, the joints of wallpaper canvases can invisibly.

After gluing the last one in front of the inner corner of the fabric should measure the remaining distance. It is measured from the edge of the glued cloth to the adjoining wall, the resulting figure is inserted 10-15 millimeters. If the partitions are extremely curved, the additional figure may be more.

Cut a strip equivalent to the resultant figure, taking into account the allowance. The surfaces are treated with glue. Based on the sort of coat it might be precisely the wall or both surfaces.

The strip has been glued individually using the cut side to the wallsocket. The wallpaper should go on the opposite airplane.

In case the glued background is sterile, then you will need to make several little cuts perpendicular gidpola.ru to the springs.

Level or slope on the adjacent wall is a perpendicular line. The distance in the corner is equivalent to the width of the preceding cut strip, not adding developments.

The surfaces are smeared with adhesive, and the coat is glued to the wall with the flat side to the marked line. The cut goes onto the adjoining wall.

The best way to glue the outer corner (outer corner)?

Protruding corner should be glued by analogy with the inner, however there are little differences, which also need to be taken into account when working.

Measured the distance remaining from the glued wallpaper into the adjoining wall. Add 20-25 millimeters to the got figure.

A segment is cut away, considering the added 20-25 millimeters.

Before gluing, the surfaces have been treated with adhesive.

The edge must be glued into the background fixed on the wall, your own cut side”extends” into the adjacent plane. If needed, small cuts are created in the area of visiting the other wallpaper, smoothed and pushed into the wall.

Draw a vertical strip on the adjacent wall in a distance of just glued cut strip and 6-10 millimeters.

After applying the glue, the strip is then placed on the wall using its flat side into the marked line, going over the edge of the glued strip.

The joints are smeared with glue and ironed using a roller. Following that, the top layer is trimmed along the ruler and the 2 layers are combined together.